49
④
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to be [AHEAD]position.
⑤
Press Input switch
⑥
In case of not the initial set, set operation/set switch to [operation]. Indicator would
be displayed 0 at normal operation.
Clutch ahead neutral position set.
①
Check if operation/set switch is [set] mode.
②
Press choice switch to set 4 on indicator.
③
Set clutch controller of remote controller to [N] position.
④
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to
be [ASTERN]speed position.
⑤
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to be [N]speed position.
⑥
Press Input switch
⑦
In case of not the initial set, set operation/set switch to [operation]. Indicator would
be displayed 0 at normal operation.
Clutch ASTERN position set.
①
Check if operation/set switch is [set] mode.
②
Press choice switch to set 5 on indicator.
③
Set clutch controller of remote controller to [ASTERN] position.
④
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to be [ASTERN]speed position.
⑤
Press Input switch
⑥
In case of not the initial set, set operation/set switch to [operation]. indicator would
be displayed 0 at normal operation.
Clutch ASTERN NEUTRAL position set.
①
Check if operation/set switch is [set] mode.
②
Press choice switch to set “ on indicator.
REF
According to ships condition (caused by backlash), it is distinguished control condition
between ASTERN to NEUTRAL and AHEAD to NEUTRAL, then set separately AHEAD NEUTRAL
or ASTERN NEUTRAL.
Caution Notice if fushble cable is too tightly pulled.
Caution Notice if fushble cable is too tightly pulled.
50
③
Set clutch controller of remote controller to [N] position.
④
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to be [ASTERN]speed position.
⑤
Press ▲ switch or ▼ switch to control Clutch lever of Control lever(manual
controller) to be [N]speed position.
⑥
Press Input switch
⑦
In case of not the initial set, set operation/set switch to [operation]. Indicator would
be displayed 0 at normal operation.
Governor sensitivity set.
①
Check if operation/set switch is [set] mode.
②
Press choice switch to set “ on indicator.
③
Sensitivity control by ▲ switch (increase sensitivity, indicator number is increased)
or ▼ switch (decrease sensitivity, indicator number is decreased). This is the best
suited set on delivery, then other control doesn't need but in case of necessary, the
following order is controlled. (Sensitivity control is feasible 1 to 5)
A. At normal movement governor controller of remote controller is in no motion,
governor lever is coming and going to decrease sensitivity.
B. The more governor controller of remote controller move a lot the more governor
lever move. If it is less move and governor lever is no movement, set sensitivity
high.
④
Above [3] item control is over, press Input switch.
⑤
In case of not the initial set, set operation/set switch to [operation] Indicator would
be displayed 0 at normal operation. [5] In case of not the initial set, set
operation/set switch to [operation] Indicator would be displayed 0 at normal
operation.
Clutch sensitivity set
Caution
Clutch sensitivity control is required to following process such as, [1 Governor
FULL position set], [2 Governor SLOW position set], [3 Clutch AHEAD position set], [4
Clutch
AHEAD N position set], [5 Clutch ASTERN position set], [6, Clutch ASTERN N position set],
Caution
Governor sensitivity control is required to following process such as, [1 Governor
FULL position set], [2 Governor SLOW position set], [3 Clutch AHEAD position set], [4
Clutch
AHEAD N position set], [5 Clutch ASTERN position set], [6, Clutch ASTERN N position set],
REF According to ships condition (caused by backlash), it is distinguished control
condition between ASTERN to NEUTRAL and AHEAD to NEUTRAL, then set separately AHEAD
NEUTRAL or ASTERN NEUTRAL.
