10
Turning Your Device On and Off
Turning Your Device On
Press and hold the
Power/Lock
Key
.
Note
: Your device’s internal
antenna is located along the
top back of the device. Do not
block the antenna; doing so
may affect signal quality and
may cause the device to
operate at a higher power level
than is necessary. For more
information, refer to
“GPS
Applications”
on page 91.
Turning Your Device Off
1.
Press and hold the
Power/Lock
Key
.
2.
At the prompt, touch
Power off
➔
OK
.
Setting Up Your Device
When you first turn on your device, you are asked to set up a
few things. To do that, the following screens display. Some
screens can be skipped (touch
Skip
) or re-displayed (touch
Back
). Some screens display depending on the options you
choose.
1.
When you first turn on your tablet, the
Let’s set up your
device!
screen displays.
2.
The default language for your tablet is English. If you
would like to select Spanish, tap
Español
on the bottom
right-hand side of the screen.
3.
Tap
Terms & Conditions
, read the End User License
Agreement for Ready2Go, then tap
Back
.
4.
Tap
get started
.
– or –
Touch
Remind Later
to set up your tablet later. You can
access Ready2Go by tapping
Applications
➔
AT&T Ready2Go
.
5.
Read and follow the instructions on each screen to set
up your tablet.
