Samsung MSYS 5150, Руководство по обслуживанию

Страница: 12 / 210

3-22 Samsung Electronics
Setup and Installing
• Redial interval-Your machine can automatically
redial a remote fax machine if it was busy or does
not answer the first call.
Enter the number of minutes (from 01 to 15) using
the number keypad.
• Redials-Enter the number of attempts (from 0 to
9) to redial the number before giving up.
If you enter 0, the machine will not redial.
• Answer Rings-You can select the number of times
your machine rings before answering an incoming
call. If you are using your machine as both a
telephone and a fax machine, we suggest you set
the ring count to at least 4 to give you time to
answer.
Enter a number from 1 through 7 on the number
keypad.
• DRPD (Distinctive Ring Pattern Detection)
Mode-’Distinctive Ring’ is a telephone company
service which enables a user to use a single
telephone line to answer several different
telephone numbers. The particular number
someone uses to call you on is identified by
different ringing patterns, which consist of various
combinations of long and short ringing sounds.
This feature is often used by answering services
who answer telephones for many different clients
and need to know which number someone is
calling in on to properly answer the phone.
Using the Distinctive Ring Pattern Detection
feature, your fax machine can ‘learn’ the ring
pattern you designate to be answered by the FA X
machine. Unless you change it, this ringing
pattern will continue to be recognized and
answered as a FAX call, and all other ringing
patterns will be forwarded to the extension
telephone or answering machine plugged into the
EXT.LINE jack.
You can easily suspend or change Distinctive Ring
Pattern Detection at any time.
Before using the Distinctive Ring Pattern
Detection option, Distinctive Ring service must be
installed on your telephone line by the telephone
company. To setup Distinctive Ring Pattern
Detection, you will need another telephone line at
your location, or someone available to dial your
FAX number from outside.
Press 1 to turn this feature on.
Press 2 to turn this feature off .
Press 3 to setup the Distinctive Ring Pattern
Detection. The LCD displays ‘WAITING RING’.
Call your fax number from another telephone. It is
not necessary to place the call from a fax machine.
When your machine begins to ring, do not answer
the call. The machine requires several rings to
learn the pattern.
When the machine completes ‘learning’, the LCD
displays ‘END DRPD SETUP’.
W ith the DRPD feature active, ‘DRPD’ appears in
the display and the previously set reception mode
is ignored. If you turn DRPD off, the machine
returns to any previously set reception mode.
Notes:
• DRPD must be set up again if you re-assign
your fax number, or connect the machine to
another telephone line.
• After DRPD has been set up, call your fax
number again to verify that the machine
answers with a fax tone, then have a call placed
to a different number assigned to that same line
to be sure the call is forwarded to the extension
telephone or answering machine plugged into
the EXT.LINE jack.
• Send from Memory-If you are annoyed that you
have to wait until documents in the feeder are
sent out when you try to send or reserve another
fax, turn this feature on. This feature enables all
transmission documents are automatically
scanned into memory before transmission.
Press 1 to turn this feature on.
Press 2 to turn this feature off .