S
AMSUNG
W
IRELESS
R
OUTER
U
SER
M
ANUAL
P
AGE
25
Internet Connection Type: L2TP (Username / Password)
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
The following parameters can be configured:
Address Mode:
Here the user can specify whether this Internet connection requires the use of a Dynamic
or Static IP address. L2TP usual requires a Dynamic IP configuration.
L2TP IP Address:
Enter the L2TP IP address used here. This option is only available if Static IP is selected.
L2TP Subnet Mask:
Enter the L2TP Subnet Mask used here.
L2TP Gateway IP Address:
Enter the L2TP Gateway IP address used here.
L2TP Server IP Address:
Enter the L2TP Server IP address used here. This is normally the same a the PPTP Gate-
way IP address.
Username:
Enter the L2TP username used here.
Password:
Enter the L2TP password used here.
Verify Password:
Re-enter the L2TP password used here.
Reconnect Mode:
Use the radio buttons to specify the reconnect mode. The user can specify a custom
schedule or specify the
On Demand
, or
Manual
option. To specify a custom sched-
ule, use the drop-down menu to select one of the schedules that has been defined in the
Schedules page. To create a new schedule, click the
New Schedule
button to open the
Schedules page. Schedules will be discussed later.
Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
Primary DNS Server:
Enter the Primary DNS IP address used here.
Secondary DNS Server:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
DRAFT, not Final
