S
AMSUNG
W
IRELESS
R
OUTER
U
SER
M
ANUAL
P
AGE
19
Internet Connection Type: Static IP
Select Static IP from the drop-down menu if all the Internet port’s IP information is provided to you by your ISP. You will need
to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not
accept the IP address if it is not in this format.
The following parameters can be configured:
IP Address:
Enter the Static IP address provided by the ISP here.
Subnet Mask:
Enter the Subnet Mask provided by the ISP here.
Gateway Address:
Enter the Gateway IP address provided by the ISP here.
Primary DNS Address:
Enter the Primary DNS IP address used here.
Secondary DNS Address:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port’s physical interface MAC address on
the Broadband Router. It is not recommended that you change the default MAC address
unless required by your ISP. You can use the
Clone Your PC’s MAC Address
button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
DRAFT, not Final
