manualshive.com logo in svg

SamplexPower EVO-RC-PLUS, Руководство пользователя, Страница: 6 / 128

Поделиться
Скачать
SamplexPower EVO-RC-PLUS Скачать руководство пользователя страница 6

6  |  SAMLEX AMERICA INC.    

 

2.0  INSTALLATION GUIDELINES

EVO-RC-PLUS is provided with 10M/33ft, RJ-45 data cable 

(straight wired)

. Check the proposed routing distance of the 

wire and use longer wire, if necessary.

•  Flush mounting of the Remote requires appropriate cut-out in the wall/panel - See Fig 2.1.  
•    Full scale installation Template for panel cut-out and pilot holes for mounting screws is also provided along 

with the unit. Take necessary precautions to ensure any wiring/plumbing running behind the wall/panel is not 
damaged.

•  Route the wire to ensure there are no kinks.
•  Use appropriate grommets when the wire is passed through holes in studs/partitions to prevent damage to 

insulation.

2.1  TOOLS REQUIRED

Following tools are recommended:

•  Phillips head screwdriver   

•    Level 

 

•    Hand Drill

•  Knife/Saw   

 

 

•    Pencil 

 

•    Drill Bit (2mm / 5/64")

Fig 2.1  EVO-RC-PLUS Remote installation details

2.2 FLUSH MOUNT INSTALLATION

To flush mount, the wall opening must have at least 2” (5 cm) depth to make room for the remote and cable. Also, 
the thickness of wall/panel board at the place of mounting should not be more than 13 mm to ensure that the RJ-45 / 
RJ-12 Jack openings are not obstructed 

(see Fig. 2.3)

.

EVO-RC-PLUS Installation Template

100 mm / 3.94 in

4.2 mm / 0.17 in

114.2 mm / 4.5 in

95 mm / 3.74 in

131 mm / 5.16 in

146 mm / 5.75 in

160 mm / 6.3 in

Cut the wall / panel along the dotted 
line with a jig saw.

This will create a pocket in the wall / panel
for flush mounting the EVO-RC-PLUS.

13 mm / 0.51 in

W

ALL

Thickness of wall where

mounted should be up

to 13 mm / 0.51 in (see below). 

Wall thickness

should be up to

13 mm / 0.51 in.

BOTTOM VIEW

Flush mounting the EVO-RC-PLUS
on the wall with 4 pcs of No. 6 x 5/8”,
Self-Tapping, Flat Head Screws. 

A to D:  4 pilot holes, 2mm (5/64") diameter for ac-

cepting No. 6 x 5/7", Self Tapping, 
Flat Head Screws.

A

C

D

B

SECTION 2  | 

 

Installation

Содержание EVO-RC-PLUS

































































































































Отзывы:

Нет отзывов