manualshive.com logo in svg

SamplexPower EVO-RC-PLUS, Руководство пользователя, Страница: 115 / 128

Поделиться
Скачать
SamplexPower EVO-RC-PLUS Скачать руководство пользователя страница 115

 

   

SAMLEX AMERICA INC.  |  115

SECTION 5  | 

 

SD Card

TABLE 5.2 Example of Data Log Text File "0716007.txt" for Model No. EVO-4024 as seen through 
Text Editor "Notepad"

5.3.2.1  

Follow procedure given below to open Data Log Files in Microsoft Excel (

Version used is 2016

):

•  Start Microsoft Excel.
•  Click File Menu Tab on the top left hand corner.
•  Click "Open" from the Drop Down Menu.
•  Browse to the Directory where the Data Log Files downloaded from the SD Card are located.
•  Click on "File Types"List Box at the bottom right corner (

the List Box shows "All Excel Files" as default

) and select 

Text Files

 from the Drop Down Menu.

•  All Text Files (

.txt

) will be displayed. The screen will look like Fig 5.4. 

Fig 5.4 Screen Showing ".txt" Files downloaded from SD Card into Computer Directory

Содержание EVO-RC-PLUS

































































































































Отзывы:

Нет отзывов