SAKI BF-Sirius, Руководство пользователя

Страница: 67 / 72

BF-Sirius
Specification/Customer Support
IV- 3
Inspectable
Components
0603 mm (0201 in.) packages and up, Diodes, Tantalum capacitors, Aluminum electrolytic
capacitors, Module chips, Transistors, Power transistors, MELF resistors, Filters, Special-
shaped components, Connectors (0.4 mm pitch and up), QFP (0.4 mm pitch and up),
SOP, CSP, BGA, Adjoining components (gap: 0.2 mm and up), and Solder joints viewable
from vertical top
Inspection
Categories
Presence / Absence, Misalignment, Tombstone, Reverse, Polarity, Bridge, Foreign material,
Absence of solder, Insufficient solder, Lifted lead, Lifted chip, and Fillet defect.
Each defect name can be arranged freely by system function
Inspection Method
After image collection by line sensor camera, inspect stored images in memory
Inspection Image
TopLight image (monochrome), SideLight image (full-color), LowLight image (monochrome)
Possible to arrange various images by editing Top, Side, and LowLight images
Data Import Either from CAD data or NC data
Fiducial Mark
Shape Circle, Square, Triangle, Rhomboid
Recognition Method Centroid computation, Circumscribed quadrangle
Offset Calculation Two-points
Tact Time
Tact time is calculated by adding shading time, image scanning time, table moving time,
and calculating time.
(*1) (*2)
Tact Time
Approximately 18 sec. for 460 (W) x 500 (L) mm
(18.11 W x 19.69 L in.) size PCB
Image Scanning Time Approximately 10 sec. (*3)
Calculating Time Approximately 3 sec./10,000 inspection windows (*4)
Pre-Scan Function 2nd PCB can be processed while reviewing 1st PCB inspection result
Inspection Result
Output Screen display of defect locations, File output of defect details,
Image output of defective area, Network output of the above files
Data Counting List display of worst 20 defects, histogram display, File output of HTML-format spreadsheet.
Recognizing Ability OCR function, 1D barcode, 2D barcode (*5)
Barcode Output
Function
Printing is available in CODE39 format from the journal printer of the optional items (*6)
Inspection Specifications T a bl e 1-2
NOTE
(*1) In case the inspection data is heavier, the tact time becomes longer. The timing of inspection
starts from when table returning.
(*2) Calculating time is for reference purpose only.
(*3) If PCBA size is smaller than 460 (W) × 500 (L) mm, image scanning time will be shorter than
these values.
(*4) Calculating time depends on inspection algorithm.
(*5) Recognizing ability of 2D barcode is optional.
(*6) As the output of CODE39 barcode, the fonts provided complimentary by Technical Corp. are used.
URL: http://www.technical.or.jp/handbook/chapter-font1.html
Operating System Microsoft Windows XP Professional English version
Inspection Software Language English or Japanese can be chosen before shipment
Software Specifications T a bl e 1-3