SAKI BF-Sirius, Руководство пользователя

Страница: 27 / 72

I- 21
BF-Sirius
Operation Manual
3.9 Auto Mode
3.9.1 Operation Procedure of Auto Mode
The operation flow in Auto Mode is as follows.
Auto FFFure 3-2 9
Step
Process Auto Mode
1
Loading the PCB Load the PCB manually.
2
Scanning Press Scan button on the tool-bar or select Scan from the menu-bar.
3
Inspection Auto running.
4
Result output
↓
5
Unloading the PCB Unload the PCB manually.
6
Check the OK / NG
judgement
Judge the result by OK or NG.
Repeat from Step 1 to Step 6.
Operation Procedure in Auto Mode T a bl e 3-2
3.9.2 Inspection Method of Auto Mode
Press Step1: Auto button on the tool-bar or select Auto from the menu-bar. The dialog shown in
Figure 3-30 appears.
Auto Mode Setup FFFure 3-30
Set necessary settings for automatic operation. Check Step2: Inspect .
After all the settings are completed, press Step3: OK .