SAKI BF-Sirius, Руководство пользователя

Страница: 15 / 72

I- 9
BF-Sirius
Operation Manual
3.2 System Activation
This section describes the procedures for the system startup.
Separate switches are used for the system activation of the inspection machine and the PC.
3.2.1 System Pre-boot Check
Check the following items before turn on the power.
If any problem occurs, please contact Saki Corporation or our representatives.
There is no deep external scratch on the inspection machine. •
There is no damage in the power supply cords and connection cables. •
All power supply cords and connection cables are connected firmly and correctly. •
There is no object on the scan table. •
There is no object which hinders table-motion. •
There is no object on the machine. •
There is no foreign object inserted in the entrance of the machine. •
3.2.2 Turn on the Machine
Turn on the earth leakage breaker on the rear side of the machine and turn the main breaker Step1:
clockwise direction to power on the machine.
Beep tones sound after turn on the power and push the reset switch. Step2:
As the machine activates normally, the power lamp lights on.
Earth Leakage Breaker
Main Breaker
Power Lamp
Reset Switch
Turn on the Machine FFFure 3- 5