Sakai SV540 Series, Инструкция по эксплуатации и обслуживанию

Страница: 34 / 108

2. OPERATION
– 28 – – 29 –
IMPORTANT
• Hydraulic oil filter warning lamp
Go on when the engine rpm is increased before the engine has been warmed up
enough. Keep the engine idling until the lamp goes off, before starting your work.
In that case, warm up the engine sufficiently, and operate the machine after the
warning light has gone out. When the warning light will not go out, the filter may
be clogging up. Check the filter.
• Checking for warning lamp and parking brake indicator lamp
They should turn on light when the starter switch in ON position.
If not, there is some trouble.
Check and repair the combination meter or wirings harness.
• The window of the combination meter
The window of the combination meter may become invisible because of aged
deterioration coused by fine sand or dust or ultraviolet. When any flaw or mist is
found on the window,contact our branch offices or designated factory.
2. OPERATION
– 28 –
Monitor display
★
Indicator lamps [ ]
Light up when corresponding systems have been operated.
★
Parking brake indicator lamp [ ]
It will flash once when the starter switch is turned to the " " position.
After that it will remain on while the parking brake is engaged, and turn off when it is
released.
★
Hydraulic oil filter warning lamp [ ]
It will flash once when the starter switch is turned to the " " position.
After that it will turn on when the hydraulic oil filter becomes clogged. Stop the machine and
carry out an inspection.
★
Engine oil pressure warning lamp [ ]
It will flash once when the starter switch is turned to the " " position.
It will turn on while the engine is running if the engine oil pressure drops below the
specified value. Stop the machine and carry out an inspection.
★
Battery charge lamp [ ]
It will turn on when the starter switch is turned to the " " position, and turn off when the
engine starts running.
It will turn on while the engine is running when a problem arises with the electric system.
Stop the machine and carry out an inspection.