Sakai SV540 Series, Инструкция по эксплуатации и обслуживанию

Страница: 85 / 108

3. PERIODIC MAINTENANCE
– 80 –
Final drive
1) Rotate the wheel till the drain port is located at the
lowest position. Remove plug to drain oil.
2) At the final drive, adjust the position of plug until it is
parallel to the ground.
3) Fill oil through the fill port till oil overflows from the
level port.
4) When the final drive case is filled to the specified
level, refit the removed plugs.
CAUTION
Be sure to use gear oil recommended by SAKAI
(refer to page 90).
Differential case
1) Drain oil by removing the drain plug, fill port plug and
level plug.
2) Refit the drain plug.
3) Fill oil through the fill port till it overflows from the
level port.
4) Refit the removed plugs.
CAUTION
Be sure to use gear oil recommended by SAKAI
(refer to page 90).