Sakai SV540 Series, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 108

– 6 –
WARNING: Negligence of these instructions can lead to accidents.
■
Do not use a machine which has not been serviced correctly at regular intervals
• Before working, perform necessary inspections. Start operation only after making
certain the machine is in good operating condition. If found to be abnormal, report to the
responsible person and have the fault corrected. Operate the machine after making sure
that it is safe to operate.
■
Do not allow anyone to enter the work area except for authorized personnel
• Always conduct the work paying attention to the
workers around the machine.
■
Beware when operating moving parts
• When operating moving parts such as covers, be sure to understand the way they move
and take care not to get the hands and feet caught.
■
Operator must sit in the seat when operating the machine
■
Be careful of hot parts
• After your machine has operated for some time, the
coolant, engine oil and hydraulic fluid will become hot
and the pressure will build up. If, in this state, you try to
remove the filler caps, drain the oil or replace the filters,
you can get burned. Perform this work in accordance with
the correct procedures with the machine cooled down.
• To remove the radiator cap, slowly loosen the cap to
relieve the pressure with the engine stopped and the
coolant cooled down (For the radiator cap with a lever,
lift the lever to release the trapped pressure).
• When removing the filler cap on the hydraulic tank, release the trapped pressure by
turning it out slowly to prevent the oil from gushing out (For the cap with a lever, lift the
lever to release the trapped pressure).
• While the engine is running or immediately after it has been stopped, do not touch the
engine, muffler, exhaust pipes, oil hydraulic pumps, oil hydraulic motors, lights, etc., as
they will be hot.
• Resin and metallic parts may become hot under direct sunlight on a hot day. Direct contact
with such parts may cause burns, so be sure to wear clothing and protective equipment
appropriate for the job.