Sakai SV540 Series, Инструкция по эксплуатации и обслуживанию

Страница: 92 / 108

3. PERIODIC MAINTENANCE
– 86 – – 87 –
㉘
Fuel tank
1) With the drain plug removed, remove the water and
sediment from the bottom of the tank.
2) If sedimentation is substantial, remove the drain plug
and clean the interior of the tank.
3) When the necessary work and refueling are complete,
tighten the filler cap positively.
NOTE: When removing the water and sediment from the
tank filled with the fuel, the fuel will gush out if the
drain plug is screwed out completely.
WARNING
• The fuel will catch fire if open flames or ignition
sources are used close to it.
• Do not smoke or use a match or cigarette
lighter close to it.
㉙
Fuel tank breather
1) Remove four bolts.
2) Open a cover and clean an inside.
3) Attach a cover and bind four bolts tight.
3. PERIODIC MAINTENANCE
– 86 –
⑱
Breather
➡
See the separate engine manual.
Provide inspection and cleaning of the breather hoses and
breather filter element.
When you find any damage, make sure to replace it.
㉔
Radiator
Clean the cooling fins.
WARNING
Use the safety glasses or goggles during the use of compressed air.
IMPORTANT
If the discharge rate of compressed air or tap water is too high, it can damage the
radiator or the fins of the oil cooler. Keep a distance of 500mm or more between
the nozzle and the core surface.
In case dirt or dust is attached, clean the radiator, the oil cooler and the core with compressed
air or tap water.
It is to prevent performance decline of the cooling system.
IMPORTANT
Don’t use any driver or steel spatula (or paddle). If it rubs the fins, it can damage
the tubing.