Sakai SV540 Series, Инструкция по эксплуатации и обслуживанию

Страница: 44 / 108

2. OPERATION
– 38 – – 39 –
2.2.2 Scraper replacement and adjustment
SV540D
,
SV540TF
,
SV540FB
,
SV640D
1) Clearance adjustment of scraper
Ⓐ
①
Loosen bolts and nuts
Ⓑ
at 8 locations.
②
Provide a clearance of 20 mm between scraper
blades
Ⓐ
and the drum.
③
Retighten bolts and nuts
Ⓑ
at 8 locations.
2) Clearance adjustment of scraper
Ⓒ
①
Loosen bolts
Ⓓ
at 8 locations.
②
Provide a clearance of 20 mm between scraper
blades
Ⓒ
and the drum.
③
Retighten bolts
Ⓓ
at 8 locations.
3) Change from TF to T types
①
Loosen bolts and nuts
Ⓑ
at 8 locations.
②
Adjust the scraper blade
Ⓐ
by changing its direction
so that it does not interfere the pads.
③
Retighten bolts and nuts
Ⓑ
at 8 locations.
④
Loosen bolts
Ⓓ
at 8 locations.
⑤
Adjust the scraper blade
Ⓒ
so that it does not
interfere the pads.
⑥
Loosen bolts
Ⓓ
at 8 locations.
⑦
Loosen bolts and nuts
Ⓕ
at 18 locations.
⑧
Adjust the scraper blade
Ⓔ
by changing provide a
clearance of 20 mm between scraper
Ⓔ
and the
drum.
⑨
Retighten bolts and nuts
Ⓕ
at 18 locations.
SV540T
,
SV540DF
,
SV540TB
,
SV640T
1) Clearance adjustment of scraper
Ⓐ
(Nine pieces are mounted on both the top surface and
the undersurface for each in front of the machine.)
①
Loosen bolts and nuts
Ⓑ
at 18 locations.
②
Provide a clearance of 20 mm between scraper
Ⓐ
and the drum.
③
Retighten bolts and nuts
Ⓑ
at 18 locations.
SV540TF, SV540FB
SV540TF
(at the time of T type specification
)
2. OPERATION
– 38 –
2.2 Handling and Adjustments
2.2.1 Seat adjustment
Adjust the seat for your best operating position. Move
the lever as shown by arrow. With the lever held in that
position, slide the seat forward or backward as desired.
When properly adjusted, release the lever.
Adjust your seat position to suit you as follows:
1) Pull the lever
①
and adjust seat position longitudinally.
2) Turn the backrest adjust dial
②
for optimum angle.
3) Move the suspension lever
③
to select suitable
suspension for your body weight.
WARNING
• The seat shall be adjusted before starting any works or when the driver is
switched over the other person while the machine is completely stopped. Do
NOT adjust the seat while the machine is in motion.
• Some unexpected troubles may be accidentally caused if moving the machine
without completely fixing the seat such as while sliding the seat. Before moving
the machine, make certain that the seat is completely fixed after making proper
adjustments.
• Do not pinch your fingers, hands or legs while adjusting the seat.
• Adjust seat only when one person rides on the machine.
• Adjust seat only when the machine stays on the flat ground.
• Adjust the seat so that your back is in close contact with the back of the seat
while seated and when stepping on the brake pedal down to the floor. Adjust
the seat so as to be able to certainly step on the brake pedal when twisting your
body around to look back in order to move the machine backwards.
IMPORTANT
Be sure to wear the seatbelt during operation.