SAINT-GOBAIN CertainTeed Volu-Matic 500, Руководство по эксплуатации и информация по безопасности

Страница: 10 / 62

10
All Volu-Matic 500 machines are factory equipped with side, front, and rear guards. The top of the machine
does not require guarding when correctly mounted in the contractor’s truck as shown in the installation
instructions. If the machine is installed so that the top is exposed, such as in a manufacturing plant, or in an
open top trailer installation, a top guard will have to be equipped.
The front swing gate guards are equipped with a recessed T-Handle Latch 1 . These guards must never be
opened while your Volu-Matic 500 machine is in operation – there are shafts with guarding over them, which
are still rotating.
If these gates are opened, safety switches 2 are mounted to the swing gates which will only
stop chain driven mechanisms and the blower. If the mechanisms do not shut off or stop when either of the
gates are opened, you should request that maintenance be performed on the safety interlocks. You will have
to push the reset button 3 in order to restart the machine after the swing gates are closed for machine ready
on. If the safety switch or guard should become damaged, replace them, to ensure safety while operating your
Volu-Matic 500 machine.
1
2
B 6 4 3
5
A