Sailor 100, Руководство по установке

Страница: 88 / 186

Configuration with the web interface
6-16 Chapter 6: Configuration 98-136280-B
5. At LNB LO setup you can set the LNB LO frequencies to the appropriate value for the
region covering the satellite profile, see the drop-down list in Figure 6-8: Web
interface: SETTINGS, Satellite profiles — new entry (example) on page 6-14. If in
doubt leave this setting at the default value (Universal (10.600 GHz/9.750 GHz)). See
also the Figure 2-5:
Examples of LNB LO frequencies used worldwide on page 2-6.
6. C lick Apply to save the settings for the satellite profile.
6.3.4 TV satellites
When creating a satellite profile, you select a satellite from the list of TV satellites.
Disabled TV satellites will not be selectable in the satellite profile.
When to update the list of TV satellites
The system comes with a list of TV satellites pre-installed. Usually, the data describing
a satellite does not change during the lifetime of that satellite and the data will
typically not need to be updated. It is however possible to manually edit the data or
e.g. add a new entry in case a new satellite has been launched and TV reception is
required from the satellite.
Removing and disabling entries in the list of TV satellites
You can only delete user defined entries. If a pre-installed entry is unwanted, it can be
disabled.
Adding and editing entries in the list of TV satellites
Editing a pre-installed entry will disable that entry and add a new user-defined entry.
The new user-defined entry includes the changes made. The pre-installed entry
remains unchanged and disabled.
Note
An up-to-date version of the database is included in each software release.
When updating the software of the system the database is automatically
updated.
Figure 6-9: TV satellite, remove and disable
Note
Only user defined entries have the delete link.
SAILOR100IM.book Page 16 Friday, January 18, 2013 10:28 AM