Sailor 100, Руководство по установке

Страница: 110 / 186

Configuration with the Control Panel
6-38 Chapter 6: Configuration 98-136280-B
To get started with the Control Panel, do as follows:
1. Make sure that it is connected to the LAN port 4 at the rear of the ACU, possibly
through a switched network.
2. Press the on/off button. A couple of start-up screens are displayed. Wait
until the Dashboard is displayed:
• ACU connection: OK
• System: status information, e.g. TRACKING. When a yellow triangle is displayed
in the section ACU Connection the ACU is not ready for operation.
3. The Dim button is used to dim the light in the Control Panel. Push and
hold to dim the display more/less. Each new push changes direction
between more and less.
4. Now you can create satellite profiles.
For details on ACU network configuration and DHCP server see Configuring the LAN
network on page 6-26.
6.4.2 Creating or editing a profile
To create or edit a profile, i.e. satellite profile, do as follows:
1. Tap the menu icon .
2. Select Manage Profiles .
3. Select Create Profile or Edit Profile . When creating a new profile start by filling in
the satellite profile name.
Note
If connected directly to the ACU, make sure that the
DHCP server has been enabled on that port.
Note
It is helpful to assign a name containing the location
where the Satellite profile is to be used (e.g. "Gulf of
Mexico" or "North Sea") and possibly the provider.
If the profile contains more items than can be shown in
the window, a scroll indicator is displayed. Scroll the
window content to view all items.
SAILOR100IM.book Page 38 Friday, January 18, 2013 10:28 AM