Sailor 100, Руководство по установке

Страница: 53 / 186

Installation of the ADU
98-136280-B Chapter 3: Installation 3-17
3333
In
stall
ati
o
n
3.3.1 Installing the ADU
Make sure that there is sufficient space underneath the ADU to open the service hatch.
Through this hatch you access the ADU modules for service and maintenance.
The ADU does not have to be aligned with the bow-to-stern line of the ship. When
configuring the SAILOR 100 Satellite TV you make an azimuth calibration to obtain the
correct azimuth of the ADU.
• It is important to maintain vertical orientation of the ADU center line .
• Consider the aspect of interference, read more about this in ADU mast design:
Foundation and height on page 3-7.
• Install the ADU where vibrations are limited to a minimum .
• Always use all 4 bolts when installing the ADU.
To install the ADU, do as follows:
1. Install the mast with the mast flange and have the 4 M12 bolts ready.
2. Undo all shipping buckles, take off the wooden top and remove the casing.
3. Unscrew the 4 bolts holding the ADU on the wooden platform.
Figure 3-14: Free space for access to the service hatch
Provide sufficient free space
for access through
the service hatch.
SAILOR100IM.book Page 17 Friday, January 18, 2013 10:28 AM