1.
Feed supply connection
Flow restrictor
3.
RO water out
1. The RO system is fed by connecting the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
left port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the flow restrictor connects to this port.
The other end connects to the smaller barb connection
on the airgap faucet.
2.
Drain outlet to Air-gap connection
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installation kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
filter
1/4”
3/8”
Post Filter
1.
Feed supply connection
Flow restrictor
3.
RO water out
1. The RO system is fed by connecting the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
left port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the flow restrictor connects to this port.
The other end connects to the smaller barb connection
on the airgap faucet.
2.
Drain outlet to Air-gap connection
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installation kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
filter
1/4”
3/8”
Post Filter
1.
Feed supply connection
Flow restrictor
3.
RO water out
1. The RO system is fed by connecting the angle
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
left port marked IN
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
black tubing with the flow restrictor connects to this port.
The other end connects to the smaller barb connection
on the airgap faucet.
2.
Drain outlet to Air-gap connection
3. RO water exits the manifold through
the right hand port marked ‘out’. This
1/4” line connects to the reducing tee
included with the installation kit. The
run part of the tee (3/8”) connects to
the tank and the other side to the post
filter
1/4”
3/8”
Post Filter
Neo-Pure
®
RO-4300RX Pharmacy Trusted
Reverse Osmosis Drinking Water System
Quick Start
Guide
The RO system is fed by connecting the angle stop adapter to
the cold supply line under the sink. This connects directly
to the manifold through the left port marked IN.
RO water exits the manifold through the right
hand port marked ‘out’. This 1/4” line connects
to the reducing tee included with the installation
kit. The run part of the tee (3/8”) connects to
the tank and the other side to the post filter.
1. Feed Supply Connection
3. Ro Water Out
2. Drain Outlet To Air-Gap Connection
Water carrying the rejected contaminants exits the manifold
through the center port marked Drain. The black tubing
with the flow restrictor connects to this port. The other
end connects to the smaller barb connection on the
airgap faucet.
3
2
1
