56
Sagemcom · FAX 4560 · FAX 4565 · FAX 4570 · FAX 4575
EN
3 Clean the rubber roller of the document feeder
(6¦×)
with a soft lint-free cloth. Rotate the feed
roller; You must clean the entire roller.
4 Close the panel.
CLEANING THE LED PRINT HEAD
Introduction
If white lines appear on the printed pages or the print
quality is blurred, you should clean the LED print
head.
1 Open the device by lifting the device cover for-
wards
2 Remove the toner cartridge by gripping the handle
in the middle and pulling it forwards out of the
device
CAUTION!
DO NOT OPEN DURING A PRINT JOB!
Never open the cover while the device is
printing.
DANGER!
EDGES ON THE DEVICE COVER!
Take care of the edges on the device
cover. You could injure yourself if you
reach into the device from the side.
DANGER!
ESCAPING TONER DUST!
Carefully remove the toner cartridge
from the device so that no toner dust
spills out. Take care where you place the
toner cartridge, escaping toner dust may
soil the surface.
Never open a toner cartridge. If toner
dust is released into the air, you should
avoid allowing it to contact your skin
and eyes. Do not inhale the released
toner dust. Remove the toner dust from
clothing or objects with cold water; hot
water would only cause the toner to set.
Never remove loose toner dust with a
vacuum cleaner.
DANGER!
INSTRUCTIONS FOR CLEANING!
Follow the instructions for cleaning,
page 55.