24
Sagemcom · FAX 4560 · FAX 4565 · FAX 4570 · FAX 4575
EN
LOAD PAPER INTO THE
MANUAL PAPER FEED
1 Press
OK
,
202
and
OK
.
2 Select the manual paper feed using
[
.
3 Confirm with
OK
.
4 Load the paper into the manual paper feed on the
front of the device.
5 Enclose the paper with the two side paper guides.
Be sure not to enclose it so tightly that it bends.
Reset Settings
Spaltenumbruch
LOADING PRE-PRINTED
MATERIAL
Forms from a Laser Printer!
INSERT THE TEMPLATE INTO THE
PAPER TRAY
Insert the Template into the Paper Tray
If you would like to print on an input sheet (for exam-
ple, forms or stationery), place the input sheet face
down in the paper tray, with the top of the page
towards the front.
Vorlagen einlegen
LOAD TEMPLATES INTO THE
MANUAL PAPER FEED
Load Templates into the Manual Paper Feed
If you would like to print on an input sheet (for exam-
ple, forms or stationery), place the input sheet face
up with the top of the page facing forwards (towards
the device) into the manual paper feed.
Manuelle Zufuhr: Vorlagen einlegen
INSERTING SLIDES AND
LABELS
Inserting Slides and Labels
Use slides which are designed for copiers and laser
printers as they must stand up to high temperatures
and printing. The printing side is usually somewhat
rougher than the reverse side.
You can insert slides and sheets of labels into the
paper tray and into the manual paper feed. It is pref-
erable to use the manual paper feed for printing on
this print media (see also chapter on
Load Paper into
the Manual Paper Feed
, page 24).
Unsuitable Slides and Labels!
CAUTION!
RESET SETTINGS
Reset the standard setting again after the
print job so that the paper feed from the
paper tray is guaranteed for incoming fax
transmissions.
CAUTION!
FORMS FROM A LASER PRINTER!
Forms that have been printed out by a laser
printer are not suitable for further printing.
EX
B5 B
5
A5
B6
A4
Lorem Ipsum sed dolor cum
vel ulla faccum ip exeratie
esequatisit iurercing ex ecte
venim do od tisl delit adit nulla
feugiamet,
cortis deliqui
blamcon sequametum iustion
CAUTION!
UNSUITABLE SLIDES AND LABELS!
Do not use slides which are designed for
manual inscription or for an overhead pro-
jector. These slides can melt in the device
and damage it.
Use sheets of labels for use in laser print-
ers. The labels must cover the entire sheet
otherwise they could peel off in the device.