Sagem MF5990dn, Руководство пользователя

Страница: 95 / 147

MF 5990dn - Agoris M943dn
- 95 -
13 -
Maintenance and incidents
To replace the toner cartridge:
1 Stand opposite the machine.
2 Press the toner cartridge access button.
3 Lift up the flatbed scanner and open the access flap
to the toner cartridge.
4 Remove the used toner cartridge and place it in the
plastic bag (provided in the toner kit). Dispose of it
in accordance with local regulations in force.
5 Unpack the new toner cartridge and shake it gently
7 to 8 times to distribute the toner evenly through
the cartridge.
Shaking the toner cartridge carefully will guarantee
the maximum number of copies per cartridge.
6 Take hold of the toner cartridge by the handle,
place it on a flat surface and remove the cover by
pulling on it horizontally.
7 Insert the toner cartridge into its compartment,
pushing it fully in until it engages (last movement
downwards).
8 Close the access flap to the toner cartridge and
lower the flatbed scanner.
9 Insert the smart card provided with the new toner
cartridge into the smart card reader.
10 The machine detects the smart card and displays a
message asking you to confirm the installation of
the new consumable. Press
YES to confirm.
>
The machine reads the smart card. After reading,
the machine displays a message asking you to re-
move the smart card.
11 Remove the smart card from the reader.
Note
Always use the smart card provided when
replacing the toner cartridge. The smart
card contains the information required to re-
set the toner level. If you replace the toner
cartridge without using the smart card provi-
ded, the consumable management system
may indicate an error.
Note
Make sure you remove the toner cartridge
cover horizontally so as not to break it inside
the toner cartridge.
After removing the cover, do not shake the
toner cartridge. You may risk spilling toner.