Sagem MF5990dn, Руководство пользователя

Страница: 145 / 147

MF 5990dn - Agoris M943dn
- 145 -
16 -
Characteristics
Transparencies
It is possible to print continuously on transparencies, but feed problems may occur due to the media quality, the
accumulation of static electricity and the print environment.
Before starting printing transparencies, print out a test on standard paper to check page formatting.
Recommendations for use:
• Only use transparencies for laser printers.
• Only use transparencies for black and white printing.
• Regularly clean the printer paper path as transparencies are highly sensitive to dirt.
• Remove printed transparencies from the output tray to prevent the accumulation of static electricity.
• Avoid handling transparencies before loading them into the paper tray as fingerprints may affect print quality.
• Do not use transparencies:
– For colour printing.
– For ink-jet printers.
Index cards
Before starting printing index cards, print out a test on standard paper to check page formatting.
Printable surface
Each media has its own printable surface, the maximum surface which can be printed clearly without distortion.
This surface is limited by two hardware constraints, the size of the media and the margins required by the printer and
a software constraint, the memory available for the full page frame buffer. Whatever the media, the guaranteed print
surface corresponds to the size of the media minus 4 mm from each edge.
Main and additional paper tray Secondary paper tray
Capacity Up to 100 transparencies.
Maximum height 12.4 mm Up to 100 transparencies.
Maximum height 11.9 mm
Orientation Print side facing up Print side facing up
Driver Transparency
Weight 64 to 90 g/m² (17.1 to 24 lb)
Duplex Not supported
Main and additional paper tray Secondary paper tray
Capacity Not supported Up to 120 index cards depending
on thickness.
Orientation Not supported Print side facing up
Driver Standard paper
Weight 64 to 90 g/m² (17.1 to 24 lb)
Duplex Not supported