INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
43
network port set <LAN2|LAN3>
ingress-rate cir <96…10000000>
cbs <64…2056>
Use to set Committed Information Rate (CIR) and
Committed Burst Size (CBS) setting for ingress rate limit
on LAN2 or LAN3 port.
network port set <port> egress-
rate state {enable|disable}
Use to enable or disable egress rate limiting on a
particular port.
network port set <port> ingress-
rate state {enable|disable}
Use to enable or disable ingress rate limiting on a
particular port.
In case applied rate limit is less than possible by radio conditions, there will be a warning
indication in the main page, see example in
where rate limit is set 500Mbps while
maximum physically possible is 965Mbps.
Figure 3-28 Main page warning for rate limit
Networking
Ethernet
MAC address table
The MAC address table displays the forwarding table of MAC addresses learned by the switch
(Dynamic) and manually entered (Static).
Figure 3-29 Accessing MAC address table
Status mode
Figure 3-30 MAC address table view
1)
Modify
– press to modify
2)
Switch MAC address table on particular port. Press
button.
