SAF Integra-X, Руководство пользователя

Страница: 84 / 127

INTEGRA-X User Manual WEB GUI
SAF Tehnika JSC 84
Status mode
Figure 3-92 System services page
Press button.
Modify mode
Figure 3-93 System services modify page
1)
HTTP
– Allows disabling or enabling HTTP access to Web GUI. By default, HTTP access is
enabled.
2)
HTTP port
– Allows specifying TCP port for Web GUI access via HTTP. By default TCP port
80 is defined.
3)
HTTPS
– Allows disabling or enabling HTTPS access to Web GUI. By default, HTTPS access
is enabled.
4)
HTTPS port
– Allows specifying TCP port for Web GUI access via HTTPS. By default TCP
port 443 is defined.
5)
Redirect HTTP to HTTPS
– Allows enabling automatic redirect from HTTP to HTTPS.
6)
RADIUS
- Allows enabling or disabling RADIUS (Remote Authentication Dial In User Service).
By default, RADIUS is disabled.
7)
RADIUS port
– Allows specifying RADIUS port. By default port 1812 is defined.
8)
RADIUS server IP address
– Allows specifying RADIUS server IP address.
9)
Set RADIUS password
– Allows specifying RADIUS password.
10)
Confirm RADIUS password
– Allows confirming RADIUS password.
11)
Hide password
- Uncheck to display the entered password in plaintext.
12) By pressing
„Execute configuration”,
changes made to the corresponding section apply
only to the local side Integra-X.
13)
Reboot
– Reboots Integra-X (cold restart).