INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
21
Table 3-4
Mechanical specifications of DXATPI01
Mechanical specification
Ports
-RJ45 - Data
-RJ45 - Data + Power
-DC - 2ESDV-02P socket with screw locks**
-Grounding screw
Dimensions (W/H/D):
82 mm/41 mm/154 mm
Weight
0.4 kg
Enclosure
Steel
Operating Temperature
-10ºC to +55ºC
Cooling
Temperature controlled fan built-in
Stationary use
Climatic Class 3.1E compliant (ETSI ETS 300 019-1-3),
IP 20; weather protected locations
Mounting
-With bracket (included)
-19” rack mounting shelf (p/n I0KTPI11.003)
-DIN-rail clip (p/n I0STPI11.01)
**
2ESDV-02P plug with screw locks included.
Option #2 – customer provided a 48V power supply
The Integra-X can be powered using 36…57V DC on the Integra-X power connector described
in subsection
Use 2-pin pluggable terminal block (P/N XSPR_184) to
connect the cable to Integra-X. The power consumption of Integra-X is up to 105W. It is
recommended to use
on page
to find suitable cable diameter and length.
Option #3 –PoE injector DXATPI01 and customer provided 48V power supply
The PoE injector must be configured in the “Passive 120W” mode (see ) to provide Option #3
functionality. In case of power connection failover to the PoE injector which is set in any of PoE modes
(refer to
) PoE injector will perform the standard PoE negotiation process with the Integra-
X and there will be an interruption in the operation of the link.
The Integra-X works from the source with the highest voltage. PoE injector must be configured
in “Passive 120W” mode, refer to
. If the source fails, Integra-X will continue work from
the second source, switching will happen without interruption.
For proper power cable selection please check
System requirements
To access the Integra-X Web GUI you will need a PC with one the following Web browser:
Google Chrome;
Mozilla Firefox;
Internet Explorer 8 (or above)
Minimum supported horizontal resolution is 1366px.