INTEGRA-X User Manual
TOOLS
SAF Tehnika JSC
109
where
<interface>
− network interface from the network adapter list
<
MAC
> − required Integra device address
<reset command>
− reset options
Different reset options are available depending on the reset requirement. Reboot and
store options are also available. Store option saves the device current configuration so it
will be restored after a system reboot. The commands are available in the reset command
list. Use the command after the MAC address of the device as shown in the previous reset
command example.
Figure 6-9 Reset command list
For example, to reset users and passwords on Integra device #1, use:
lld \DEVICE\NPF_{A67EA6B7-1686-4E98-BA19-2A7E5B205DCF} reset 0004A6813773 acc
Make sure the command is run within 3 minutes after Integra reboot (“
RK1 fresh
” must be
“
true
” in the console), otherwise error shown in the screenshot below error will occur. The
recovery tool will continue to retry the command. In such situation device needs to be
rebooted in order to execute the reset command successfully again.
Figure 6-10 Command response past 3 min from Integra reboot
9)
Power down the Integra device and power it up again, the reset should be completed
soon.
Figure 6-11 Command response prior 3 min from Integra reboot
If the reset cannot be completed, redo step 8).
