INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
24
Main page
After login, you will be automatically redirected to the Main page of the Web GUI, see
Web GUI is divided into 5 sections:
1)
Top panel
– Shows information about the Integra-X FODU you are connected to:
Model name
System name
IP address
Serial number
Uptime
Firmware version
User name
2)
Menu panel
- Allows navigating between the Main page (“Main”) and subpages of 4
sections:
Main
Over the air (Radio/modem configuration)
Networking (Ethernet configuration)
Performance
System
3)
Main WEB GUI window
- by default, the Main page (“Main”) is shown. Contents will
change according to menu panel selection and chosen system working mode, see
page
and page
for
4)
MODIFY/SAVE/LOGOUT
- Allows modifying parameters in the window. If none can be
modified, the MODIFY button appears inactive. After modification, the SAVE button
becomes active and indicates a number of unsaved changes as well as their type
(when moving the cursor over the button). Pressing the LOGOUT button will log out
from the current session. This panel is visible in all pages.
Alarms appear in
red color
in case of exceeding alarm threshold values or in case of a
warning (e.g. if loopback is active).
Values appear in
orange color
in case the alarm threshold values were exceeded during
the last 15 seconds.
If you do not save the configuration after modification, it will be lost after the FODU restart.
Figure 3-6 Main page