Saab R5 SUPREME AIS, Руководство по эксплуатации и установке

Страница: 99 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A Page 99
5.11.6 Beacon Database
The Beacon Database view is used for inspection of the radio beacon station database
stored in the R4 Navigation Sensor. The Beacon Database view is accessed from Main
Menu

Status

Navigation

GPS / DGPS

Beacon Database but is only
available when using an R4 DGPS Navigation Sensor and the parameter ―Beacon
Database‖ (described in section 4.2.4) is set to ―on‖.
Figure 85
– Beacon Station Database
The beacon station list can be sorted by ID, Name, Frequency or Range by pressing
the column headers in the view. The currently used beacon station is marked with
green colour in the list. Each beacon station is also marked with an operational status
icon:
- Green icon, beacon station is operational
- Yellow icon, beacon station operational status is unknown
- Red icon, beacon station is NOT operational, do not use.
To view more information about a beacon station, select the station in the list and press
―Extended Info‖. The
Extended Beacon Info view will be shown. In this view it also
possible to manually
lock on the selected station by pressing the button ―Lock on
Station‖. The R4 DGPS Navigation Sensor will then try to tune the beacon receiver to
the selected stations frequency. If the tuning was successful the new station will be
marked with green colour in the beacon database list to indicate that it is currently
used.
Figure 86
– Extended Beacon Info