Saab R5 SUPREME AIS, Руководство по эксплуатации и установке

Страница: 62 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A3 Page 62
5.7 Status Bar
The top of the screen on the R5 SUPREME CDU always displays a summary of the
system‘s status.
Figure 26
– Status Bar
The left part of the status bar can either show the current position in latitude and longitude,
or the name of the next waypoint in the currently active route. This is configurable with the
―Status Information‖ parameter described in section 4.2.1. The status icons are displayed in
the middle of the status bar and on the right the current time and currently used RAIM level
is displayed. The time is either UTC or local (LOC) depending on the time configuration
parameters described in section 4.2.8.
5.7.1 Status Icons
The status icons that can be shown in the R5 Navigation System are:
Unread DGPS message
Active alarms
Navigating without differential corrections.
Using differential correction applied through User Port 1.
Using differential correction applied through User Port 1, Integrity Alert.
Using correction from internal radio beacon receiver (DGPS version)
Using correction from internal radio beacon receiver (DGPS version), Integrity Alert
Using differential corrections from SBAS.
Using differential corrections from SBAS, Integrity Alert.
No valid position information.
No communication with the R4 Navigation Sensor.
HDOP status indication (active if HDOP is above 4).
Navigation Sensor configured to use differential corrections but no differential
corrections are used.
Current position
Status icons
Current RAIM Level
Current time