Saab R5 SUPREME AIS, Руководство по эксплуатации и установке

Страница: 79 / 156

R5
SUPREME - Navigation System
OPERATION
7000 118-301, A Page 79
The Edit Route view can either show a list of all waypoints or a list of all legs in the
route. When the waypoints are shown, it is possible to insert new waypoints or even
complete routes into the existing route. When the legs are shown it is possible to
change the navigation algorithm, RAIM level and XTE limit for each individual leg.
To switch between waypoint view and leg view, press the button ―Show Legs/Show
WPs‖.
Figure 54
– Edit Route View
Change name of route
1.
Press the ―Name‖ edit field at the top of the
Edit Route view. A virtual
keyboard will appear.
2. Type in the new name on the virtual keyboard. Press the virtual keyboard
enter button when done.
3.
Press ―Save‖ to save the route with the new name and exit to
Route List
view.
Insert waypoints into the route
1. Make sure that the Edit Route
view shows the waypoints (press ―Show WPs‖
if the leg view is shown).
2. Select the waypoint in the route which new waypoints should be inserted
before or after.
3.
Press the button ―Insert‖ followed by ―WPT Before‖ or ―WPT After‖. The
Insert Waypoints view will be shown:
Figure 55
– Insert Waypoints View
4.
Highlight the desired waypoint and press the button ―Select Waypoint‖ to add
it to the ―Insert List‖ on the right of the
Insert Waypoints view.
5.
If more waypoints are to be inserted, repeat step ‗4‘.
6.
Press the button ―Insert‖ to insert all the waypoints from the ―Insert List‖ into
the route being edited and exit to the
Edit Route view.