Ruskin TDP05K, Технический бюллетень, Страница: 9 / 36

Release Date: 06/2022 TDP05K Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin Page 9
Flow Configuration Submenu
Selections
Configurable Options
Duct Shape Select between rectangle, round, oval, or other duct shapes.
Duct Width Select between 0 to 120 in. or 0 to 304.8 cm.
Duct Height Select between 0 to 120 in. or 0 to 304.8 cm.
Duct Diameter Select between 0 to 120 in. or 0 to 304.8 cm.
Duct Area
Scroll between 0 to 100 square feet or 0 to 9.3 square meters. A value not stored or out of range
error displays of the entry exceeds the design range. The units are previously determined.
Site Elevation Select between 0 to 15,000 feet or 0 to 4,572 meters. The units are previously determined.
Relative Humidity
Select between 0 and 99% relative humidity 1% at a time. Holding the button increases the speed
at which the value changes.
Flow Units Select between the units listed in Table 3.
Output Lockout Enter three digits with two decimal places. Units are in ft/min or m/sec.
Actual Flow Units 1 SI Units Imperial Units
Standard Flow
Units
SI Units Imperial Units
Actual/Sec ALPS ACFS Standard/Sec SLPS SCFS
Actual/Min ALPM ACFM Standard/Min SLPM SCFM
Actual/Hour ACMH ACFH Standard/Hour SCMH SCFH
Table 2: Flow Configuration Submenu Selections and Configurable Options
Volumetric Units of Measurement Display Volumetric Units of Measurement Display
Actual Cubic Feet Per Second ACFS Standard Cubic Feet Per Second ACFS
Actual Cubic Feet Per Minute ACFM Standard Cubic Feet Per Minute
1
SCFM
Actual Cubic Feet Per Hour ACFH Standard Cubic Feet Per Hour SCFH
Actual Liters Per Second ALPS Standard Liters Per Second SLPS
Actual Liters Per Minute ALPM Standard Liters Per Minute SLPM
Actual Cubic Meters Per Hour ACMH Standard Cubic Meters Per Hour SCMH
Table 4: Volumetric Units of Measurement
1. In the Operator Menu, press UP or DOWN to scroll to the Flow Configuration submenu.
1. Actual Flow Units is the default setting.
1. The standard conditions for Standard Cubic Feet Per Minute airflow measurements are as follows: 14.696 pounds per square inch
(psia) equals 101.325 kPa at sea level. 70 degrees Fahrenheit equals 15.6 degrees Celsius. 50% relative humidity (RH).
See Table 3 and Table 4 for the available selections for units appropriate for the flow type.
Table 3: Volumetric Units of Measurement from Flow Unit Selection and Display Units
2. Press ENTER .
3. Scroll through the submenu options and make any necessary updates. See Table 2 for a description of the Flow Configuration
submenu selection options and their configurable options.