manualshive.com logo in svg

Ruskin TDP05K, Технический бюллетень, Страница: 26 / 36

Поделиться
Скачать
Ruskin TDP05K Скачать руководство пользователя страница 26

TDP05K Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin

Release Date: 06/2022

Page 26

RS-485 Interface Temperature Alarm Configuration

The RS-485 Interface Temperature Alarm Configuration sub-menu is only available when either the BACnet or Modbus RTU network is 

ON (see BACnet or Modbus RTU Network Configuration). In this submenu, you can configure temperature parameters including high and 

low alarms, setpoints, and alarm delay.

Selected Submenu

Submenu Selections

Figure 18: RS-485 Temperature Alarm Configuration Flowchart

RS-485 Temperature Alarm 

Configuration Submenu 

Selections

Configurable Options

Alarm Low On/Off

Select On or Off.

Alarm High On/Off

Select On or Off.

Alarm Low Setpoint

Choose a value the temperature must go below for an alarm condition to exist.

Alarm High Setpoint

Choose a value the temperature must surpass for an alarm condition to exist.

Alarm Deadband Setpoint

Choose a value of temperature the controller must reach above the Alarm Low Setpoint for Alarm 

Low or below the Alarm High Setpoint for Alarm High before an activated alarm resets. The display 

units are the same as those chosen in the Display Configuration submenu.

Alarm Delay

Select the amount of time between any alarm condition and the BACnet Temperature Alarm Low and 

High activation. This value is adjustable between 0 and 10 minutes.

Table 17: RS-485 Temperature Alarm Configuration Sub-menu Selections and Configurable Options

Submenu Selection Display

*Default values shown

1.  In the Operator Menu, press 

UP or DOWN

 to scroll to the RS-485 Interface Temperature Alarm Configuration submenu.

2.  Press 

ENTER

.

3.  Scroll through the submenu options and make any necessary updates. See Table 17 for a description of the RS-485 Temperature 

Alarm Configuration sub-menu selection options and their configurable options.

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ESC

ESC or ENTER

ESC or ENTER

ESC or ENTER

ESC or ENTER

ESC or ENTER

Returns to 

Operator Menu

UP

UP

UP

UP

UP

UP

UP

DOWN

DOWN

DOWN

DOWN

DOWN

DOWN

DOWN

ENTER

ESC

Содержание TDP05K





































Отзывы:

Нет отзывов