RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 28 / 164

28 28
Section 2 - Rumble Hog Systems
Hydraulic Hoses
The hydraulic system operates at pressures of
up to 3,000 psi (207 BAR). Therefore, it is criti-
cal that the operator and maintenance personnel
inspect the hydraulic hoses, fittings and other
components frequently. A visual inspection of the
entire hydraulic system should be conducted each
day before operating the unit. Any hose or com-
ponent that is questionable or shows any sign of
deterioration, wear or leakage should be replaced
immediately and before operating the unit. A more
thorough inspection of the pumps and components
should be conducted at each routine service inter-
val. Remember that the hydraulic system can be
severely damaged if it runs low on fluid.
Protect the hoses from contact with sharp objects
or kinks. Never operate the hydraulic system with
a damaged hose or a hose that is questionable.
WARNING
INJURIES FROM HIGH PRESSURE HYDRAULIC SYSTEM
COMPONENT FAILURES ARE VERY SERIOUS AND CAN
RESULT IN SEVERE INJURY OR A FATALITY. ALWAYS
MAKE SURE ALL PERSONNEL ARE A SAFE DISTANCE
FROM HYDRAULIC SYSTEM COMPONENTS AND HOSES
WHENEVER THE CUTTER SYSTEM IS OPERATING.
WARNING
TO AVOID SERIOUS INJURY OR DEATH, NEVER USE YOUR
HAND OR OTHER PART OF YOUR BODY TO CHECK FOR
LEAKS IN THE HYDRAULIC SYSTEM. USE A PIECE OF
CARDBOARD OR OTHER DEVICE TO IDENTIFY WHERE THE
HYDRAULIC SPRAY IS EMITTING.
Hydraulic Hoses