102
Section 3 - operation
3.19 Convert Continuous Off-
loading to debris recovery
The optional continuous off-loading system oper
-
ates in two modes, continuous discharge or debris
tank recovery. In Continuous discharge mode, the
system creates vacuum in the cyclonic separators
that continuously move debris from the cutter to
the cone shaped separator on the top of auger.
The auger continuously moves the debris from the
separator to the shoulder or dump truck.
In debris tank recovery mode, the system creates
vacuum in the debris tank and cutter shroud that
continuously moves debris from the cutter to the
debris tank during operation. Debris accumulates in
the tank, which will need to be emptied periodically
during operation.
Before performing the conversion procedure,
make sure the cutting system is shutdown with
the park brake set and the truck in the service
position. Then use the following procedure to con-
vert continuous of-loading to debris recovery mode.
1. Make sure the truck is stopped with the park
brake set and the truck in the service position.
2. Disconnect the vacuum hose from the cutter
shroud to the cone shaped cyclonic separator
from the intake connection on the separator.
Secondary Canister Cyclonic Separator
Cone Shaped Cyclonic Separator Hoses
1.
Cone Shaped Cyclonic
Separator
5.
Cone Separator To Canis-
ter Separator Hose
2.
Debris Tank
6.
Separator to Cutter Hose
Connection
3.
Secondary Canister
Cyclonic Separator
7.
Secondary Canister
Hose Connection
4.
Cutter Shroud To Cone
Shaped Separator Hose
8.
Debris Tank Hose Con-
nections
2
4
5
7
6
8
1
6
7
3
1
Содержание RH7500
