RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 53 / 164

53 53
Section 2 - Rumble Hog Systems
The chute and door rams are controlled by switch-
es in the in the side and rear switch panels. The
hydraulic tilt ram is controlled by switches in a
remote control or the CUTE and DOOR switches
on the side and rear switch panels. The remote
control plugs into the grey junction boxes located
on the driver side of the chassis and below the
debris tank door at the rear of the debris tank.
Always make sure the truck is on level, solid
ground before dumping debris. After dumping, use
a hose or the pressure washer to clean the tank
and sump thoroughly with fresh water.
The debris tank should be checked at the begin-
ning of the shift as part of the pre-start procedure
or when you believe it may be reaching its capac-
ity. It should also be checked at the end of each
shift. Debris should never be left in the tank for a
period of more than two days. Debris will harden
and conform to the shape of the tank walls mak-
ing it very difficult to dump.
Always comply with local guidelines and state law
when dumping recovered water and debris.
NOTICE:
THE DOOR AND CHUTE SEALS MUST BE DEFLATED BEFORE
THE TANK HYDRAULIC DUMP SYSTEM WILL ACTIVATE.
Remote Control Switches
Remote Control Connected to Grey Junction Box
Side Switch Panel & Grey Junction Box for Remote Control