RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 117 / 164

117
Section 4 - lubrication & maintenance
4.5 cutting depth
adjustment procedure
Depth adjustment refers to the depth the cutting
teeth will cut into the pavement. Depth is set
by turning the adjustment bolts on each gauge
wheel mount.
Depth directly affects cutter performance and
should be checked before each shift.
It is the operator’s responsibility to monitor cut-
ter teeth wear and adjust cutting depth when
necessary.
To set cutting depth:
1. Stop the truck on level pavement with the
park brake set.
2. Loosen the three bolts on the gauge wheel
plates.
3. Make sure the cutter head is lowered flat to the
surface with the cover in place and all wheels
contacting the surface.
4. Loosen the jam nuts and turn adjusters clock-
wise to decrease depth or counterclockwise
to increase depth. Note that turning just the
left or right adjuster with change the depth
on only one side.
5. Tighten the jam nuts on the adjusters and the
three bolts on the gauge wheel plates to lock
the adjustment.
Gauge Wheel Mount & Adjusting Bolts
Cutter Inspection And Maintenance
Daily
• Inspect components for loose and broken
teeth.
Every 50 Miles
• Inspect teeth cap screws. Tighten to 35 ft lbs
if necessary.
• Inspect teeth and wedges. Replace worn or
broken teeth and worn wedges as required.
Every 100-150 Miles
• Change teeth cap screws. Tighten to 35 ft lbs.
Every 400 Miles
• Replace teeth, wedges and cap screws.