Ruijie Networks RG-S8605E, Руководство по установке и справочное руководство по оборудованию

Страница: 96 / 132

Installing SFP+/SFP Modules
To avoid damaging components due to operation errors, read this section carefully before installing
SFP+/SFP modules.
To install the SFP/SFP+ module, do as follows:
1) Turn up the handle of the module into the top bail-clasp latch. Hold both sides of the module and push the module
into place (You can feel that the module is placed in position with a click sound).
Figure 3-36 Installing the SFP/SFP+ Module
2) Use the fiber optical patch cord to connect the SFP/SFP+ module to the fiber optical network. Select the patch cord
with the connector corresponding to the port.
3) After the patch cord is connected, the Link/ACT Status LED is on. Otherwise, please check connection of the patch
cord.
Precaution
 If the SFP/SFP+ module cannot be inserted to the end, do not push it forcefully. Please try the other end of the
module.
 Do not touch the connecting finger on the module.
 Do not squeeze, bend or fold the optical fiber, which may cause system performance degradation or data loss.
 Do not remove the protective rubber plug from SFP+/SFP module before connecting fibers.
 Do not insert the SFP+/SFP module with a fiber into a slot. Unplug the fiber before installing the module.
Installing SFP+ Cables
To avoid damaging components due to operation errors, read this section carefully before installing SFP+
cables.
1) To install the SFP+ copper module, do as follows: You can install the SFP+ copper module with power on. Hold the
connector of a copper cable module with one hand and carry the cable to the front panel of the switch with the other.
Push the module gently into the SFP+ module slot until you hear a click, indicating the module is correctly installed.
Figure 3-37 Installing SFP+ Copper Module