Press the button, and the system starts to collect information, during which the device will not restart. After
the collection is complete, the device restarts automatically. Hold the button for a while and release it, the
device restarts automatically in five seconds.
LED
LED
Identification
on the panel
Status
Meaning
Off
The module is NOT receiving power.
Solid red
The module is faulty.
Blinking green
Initialization is in progress. Continuous blinking indicates
errors.
System LED
Status
Solid green
The module is operational.
Off
The module acts as the standby supervisor module.
Primary/standby supervisor
module LED
Primary
Solid green
The module acts as the primary supervisor module.
Off No
fault
Solid red
The system fails, interrupting functioning of the whole
system or a module; the device may be damaged if it
continues operating.
Fault alarm LED
Alarm
Solid yellow
The device overheats, which will affect the system
performance. The system may continue operating.
Off
SD card is not installed, or the is not connected.
Solid green
An SD card is loaded.
SD card slot status LED
None
Blinking green Data is being accessed from and written into an SD card
Off
The module is NOT receiving power or is NOT in the
position.
Solid green
The module is operational.
Solid red
The module is faulty.
FE module status LED
FE
Blinking green
Initialization is in progress. Continuous blinking indicates
errors.
Solid green
The fan is operational.
Solid yellow
The fan is NOT in the position.
Fan status LED
FAN
Solid red
The fan is faulty.
Off
The power supply module is NOT in the position.
Solid green
The power supply module is operational.
Power status LED
PWR
Solid red
The power supply module is faulty.
Off
The MGMT port is NOT connected.
Green
The MGMT port is connected at 1000Mbps.
Yellow
The MGMT port is connected at 10/100Mbps.
MGMT port status LED
None
Blinking
The MGMT port is transmitting or receiving data.
Specifications
Model M8600E-CM
CPU
Quad-core CPU, each core with the clock speed of 1.0G
BOOTROM 8
MB
Flash Memory
512 MB
SDRAM
DDRIII 4 GB
External Port
One Console port;
One 10/100/1000M MGMT port;
One SD card slot;
One USB port
Button
One Reset button
Power Consumption <40W
Содержание RG-S8605E
