Ruijie Networks RG-S8605E, Руководство по установке и справочное руководство по оборудованию

Страница: 104 / 132

Setting Terminal Parameters
 Start the PC and run the terminal simulation program on the PC, such as Terminal on Windows 3.1 or HyperTerminal
on Windows 95/98/NT/2000/XP.

Set terminal parameters. The parameters are as follows: baud rate 9600, data bit 8, parity check none, stop bit 1,
and flow control as none. Details are as follows:
1) Choose
Start
>
Programs
>
Accessories
>
Communications
>
Hyperterminal
. The hyperterminal window
appears.
2) Click Cancel. A window appears as shown in Figure 4-2.
Figure 0-2
3) In the Connectivity Note window, type the name of the new connection and click OK. A window appears as shown in
Figure 4-3. In the Connect Using field, select the serial port you want to use.
Figure 0-3
4) After selecting the serial port, click OK. The Serial Port Parameter Setting window is displayed, as shown in Figure
4-4. Set the baud rate to 9600, data bit to 8, parity check to none, stop bit to 1, and flow control to none.
Figure 0-4