Ruijie Networks RG-S8605E, Руководство по установке и справочное руководство по оборудованию

Страница: 29 / 132

Storage
Temperature
-40 to 70°C
Operating Humidity 10%-90% RH (non-condensing)
MTBF 290,000 hours
Weight Net weight: 3.80 kg
Dimensions
(W x D x H)
399 mm x 440 mm x 40.18 mm
M8600E-48GT-P-ED
Module Appearance
Figure 0-20 Appearance of the M8600E-48GT-P-ED Module
External Port
The M8600E-48GT-P-ED provides 48 copper ports. The RJ45 ports support auto-negotiation at 10/100/1000 Mbps and
hot swapping. Copper ports do not support half-duplex at 10/100Mbps.
PoE Power Supply
The M8600E-48GT-P-ED supports IEEE802.3af and IEEE802.3at PoE. It adopts the Alternative A mode for transmitting
power over Ethernet cabling, that is power is transmitted through cable pairs 1, 2, 3 and 6.
LED
LED
Identification on
the panel
Status Meaning
Off The module is NOT receiving power.
Solid red The module is faulty.
Solid yellow
High temperature alarm. The system keeps
operating but the performance is affected
Blinking green
Initialization is in progress. Continuous blinking
indicates errors.
System LED Status
Solid green The module is operational
Solid green Switching mode
Mode LED Mode_Led
Solid yellow PoE mode
Off The port link is NOT connected.
Solid green The port is connected at 1000Mpbs.
Solid yellow The port is connected at 10/100Mbps.
RJ45 port LED (in
switching mode)
Link/ACT
Blinking The port is transmitting and receiving data.
Off The port does NOT provide PoE power supply.
Solid green The port provides PoE power supply
RJ45 port LED(in
PoE mode)
Link/ACT
Solid yellow
The port is overloaded and short-circuited,
Power overload causes failure to provide PoE
power supply.
Button
The Mode button has the following functions:
 Press the “Mode” button to change the mode between switching and PoE. The green LED indicates switching mode
and the yellow LED indicates PoE mode.
 In PoE mode, hold down the “Mode” button for three seconds to disable PoE power supply and switch to the
switching mode. The LED turns green to indicate switching mode. After power on, the system is powered by PoE
power supply by default.
Specifications