RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
61
SHENZHEN RUIDA TECHNOLOGY CO., LTD
3.7.4 Screen Origin Settings
When the blue cursor is stopped at the [Screen Origin] option, the display interface is as
follows:
In here, set the origin position of the display screen, and select different screen origin
positions to mirror the display graphics in different X/Y directions. Please match the origin
position of the screen with the actual origin position of the machine. Otherwise, the screen
graphic display will be mirrored, which is inconsistent with the actual cutting direction of the
graphic.
The four small squares on the map correspond to the upper left, lower left, upper right, and
lower right origin of the display screen, and red indicates the current screen origin position. Press
[Up/Down], key to select an origin and press [Enter] to set the setting to take effect.
3.7.5 System Information
When the [System Information] option is selected under the menu interface, press the
[Enter],the interface as the following:
In this interface, you can view information such as various processing times, strokes, and
the version number of the motherboard.
