RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
20
SHENZHEN RUIDA TECHNOLOGY CO., LTD
2.7 Ethernet interface
Ethernet is an Ethernet communication interface, which is connected to the PC network port
through a network cable, enabling 10/100 MHz Ethernet communication between the mainboard
and the PC. When set to network cable connection, Select network connection from RDCutist
software. For details, please refer to the description of the "Device Connection" section.
Important:
Please use the PIN to PIN Ethernet parallel line.
2.8 BWK interface
BWK is the wireless handheld box receiver interface. It only needs to insert the receiver into
the DB9 terminal of the motherboard BWK. The 2PIN green terminal on the receiver does not
need to be connected (the green terminal shown in the figure below). For details on the wireless
handheld box, please refer to the introduction of the "BWK Handheld Box" section.
2.9 X
、
Y
、
U
、
A axis motor interface
The motor interface is defined as shown in the following
：
