RTS EKP-3016, Техническое руководство, Страница: 97 / 164

KP-3016/KP-3016A Series KP-3016/3016A Menu System 99
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
Mode
Available selections for the Mode menu are:
Always On (d)
Disabled
Switched When set to Switched, the state of the Headset is controlled by the Mic Sel key.
To configure the Headset Spkr Mode , do the following:
1.
Starting at the Audio Options|Headset Spkr menu, select Mode .
2.
Press the SEL button .
Both, Left Chan, and Right Chan appear in the panel display .
3.
Using the AUX/MENU shaft encoder, select the mode you want.
4.
Press the SEL button .
Always On, Disabled, and Switched appear in the panel display .
5.
Using the AUX/MENU shaft encoder, select the mode .
6.
Press the SEL button .
An arrow appears next to the selected option.
Audio Options Menu, Inputs
The Inputs menu is used to enable or disable volume control for audio inputs through the front panel shaft encoder. By default,
all inputs are enabled. This means the inputs are visible as inputs in the Mixing menu and (if mixed somewhere) can be
selected for volume control.
If disabled, the inputs are not visible in the mixing menu and cannot be selected for volume control.
NOTE: Disabling an input does not undo any of the mixes you had previously established in the Mixing menu; however,
it hides access to volume control of this input. This is useful if you want to set the matrix input volume, and then
want to disable the volume control so users cannot adjust the Matrix volume.
To enable or disable an input , do the following:
1.
Starting at the Audio Options|Inputs menu, select Matrix In , OMNEO1 or OMNEO2 .
NOTE: OMNEO 1 is only available in AIO mode. OMNEO 1 and 2 are not available on the KP-3016A.
2.
Press the SEL button .
Disabled and Enabled appear in the panel display .
3.
Using the AUX/MENU shaft encoder,
?
select Enabled to enable the selected Input.
OR
Using the AUX/MENU shaft encoder,
?
select Disabled to disable the selected Input