RTS EKP-3016, Техническое руководство, Страница: 130 / 164

132 KP-3016/3016A Menu System KP-3016/KP-3016A Series
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
Service Menu, Scrn Saver
Scr Saver allows the user to configure the way the screen saver feature operates.
Available selections for this menu are:
Activate Allows the user to activate the screen saver immediately (used to test current display settings).
Delay Allows the user to set the delay for Display Dim (for example, when the display will dim) and
to set the delay for Activation (for example, when the screen saver becomes active). Both
features can be set from 30 minutes, up to 12 hours, or disabled.
Display Dim Allows the user to set the brightness of the panel display from 0-100%. This setting is a
percentage of the current LCD brightness. For example, if you configured your backlight for
60%, then in this menu, 100% is equal to 60% and 0% is equal to 35%.
Mode Can be set to Bitmap, Display Off (sleep mode), or Text.
The default setting for this option is:
Delay One (1) hour for both display dim and screen-saver activation
Display Dim 25%
Mode Text
NOTE: Activating any lever key, button, or shaft encoder deactivates the screen-saver, as will an incoming call.
To manually activate the screen saver , do the following:
1.
Starting at the Service|Scrn Saver menu, select Activate .
2.
Press the SEL button .
The screen saver is activated on the keypanel panel display .
To set the delay option for the keypanel screen saver , do the following:
1.
Starting at the Service|Scrn Saver menu, select Delay .
2.
Press the SEL button .
Display Dim and Activation appear in panel display .
3.
Using the AUX/MENU shaft encoder, select Display Dim .
4.
Press the SEL button .
The Delay Time: scroll box appears in the panel display.
5.
Using the AUX/MENU shaft encoder, select the amount of time you want to expire before the display dims.
6.
Press CLR .
Display Dim and Activation appear in panel display .
7.
Using the AUX/MENU shaft encoder, select Activation .
8.
Press the SEL button .
The Delay Time: scroll box appears in the panel display.
9.
Using the AUX/MENU shaft encoder, select the amount of time you want to expire before the screen saver becomes
active.
To set the brightness of the display , do the following:
1.
Starting at the Service|Scrn Saver menu, select Display Dim .
2.
Press the SEL button .
The Brightness scroll box appears in the panel display .
3.
Using the AUX/MENU shaft encoder, scroll to the display brightness you desire.