RTS EKP-3016, Техническое руководство, Страница: 129 / 164

KP-3016/KP-3016A Series KP-3016/3016A Menu System 131
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
9.
Using the AUX/MENU shaft encoder, enter the last octet number in the DNS Address.
10.
Press the SEL button .
The OMNEO Setup menu options appear in the panel display .
11.
Press CLR to exit menu mode.
Service Menu, Page Change
Page Change is used to select whether you are allowed to change setup pages while talk keys are active. By default, in
Standard Intercom Mode, page changes are allowed when talk keys are active. However, the default in Alternate Intercom
Mode does not allow page changes to occur when talk keys are active.
Available options:
Auto The default is followed depending on the Intercom Mode: Standard or Alternate.
Always Allow Page changes are allowed while Talk Keys are active.
No Talk Keys Page changes are not allowed while Talk Keys are active. A red bar appears above/below the
keys signifying page changes are not allowed. If the talk key is turned off, the red bar turns
blue and page changes can be done.
To configure page change operation , do the following:
1.
Starting at the Service|Page Change menu, select Page Change .
2.
Press the SEL button .
Auto, Always Allow, and No Talk Keys appear .
3.
Using the AUX/MENU shaft encoder, select the page change option you desire.
4.
Press the SEL button .
An arrow appears next to the selected option.
Service Menu, Reset Cfg
Reset Cfg restores almost all custom settings to the defaults and erases all stored autodial numbers. Reset Cfg does not change
the selected alpha size, intercom mode, poll ID, or headset transfer state.
To reset the keypanel configuration , do the following:
1.
Starting at the Service|Reset Cfg menu, select Do Reset .
2.
Press the SEL button .
Configuration Reset appears in the panel display .