RTS EKP-3016, Техническое руководство, Страница: 17 / 164

KP-3016/3016A Series Installation 19
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
Connecting the Keypanel
IMPORTANT: OMNEO is not available on the KP-3016A.
You can connect the OMI using AZedit and IPedit; however, only IPedit can be used to connect the keypanel.
Configure the OMI using AZedit
To connect the OMI to the KP-3016 using AZedit , do the following:
1.
From the Status menu in AZedit, select I/O Cards .
The I/O Card Status window appears showing a list of installed cards .
2.
Right-click the OMI card you want to connect to the keypanel.
A pop-up menu appears.
3.
From the pop-up menu, select OMNEO Configuration .
The OMNEO Configuration window appears.
4.
From the OMNEO card drop down menu, select the slot number where the OMI card is located in the frame.
The Device Name field auto-populates with the name of the device.
5.
From the Local Channel drop down menu, select the channel you want to use to communicate to your keypanel
across the network.
NOTE: Channels not already configured to connect to another device appear with an asterisk (*) next to them.
6.
In the Partner Device Name field, enter the name of keypanel you want to use to communicate with. Or, select the
Browse icon to select from a list of devices.
OR
In the Partner IP Address field, enter the
IP Address of the device to which you want to connect. This field auto-
populates when you select the Device Name.
7.
From the Partner Device Type drop down menu, select the type of device to which the OMI card is connecting.
8.
From the Partner Channel drop down menu, select channel 1 on the device to which the OMI communicates.
9.
Once you are completely finished, click Apply .
Apply sends the changes to the cards in the intercom, or Click Cancel to discard all the changes made.
Add the OMI to the Device Catalog in IPedit
To add the keypanel to IPedit , do the following:
1.
Open IPedit .
2.
From the Device menu, select Add .
The Add Devices Window appears, open to the Search tab .
3.
Select the OMI card .
The Add button becomes active .
4.
Click the Add button .
The OMI card appears in the device catalog in the left panel .
5.
Click the Done button .
The Add Devices window closes .
Configure the OMI using IPedit
To configure the OMI using IPedit , do the following:
Using the Device Configuration and Status Pane