RTS EKP-3016, Техническое руководство, Страница: 91 / 164

KP-3016/KP-3016A Series KP-3016/3016A Menu System 93
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
Metering
Metering allows you to monitor an audio source connected to the keypanel. The energy of the incoming audio is split into
five (5) bands and displayed on the left side of the keypanel when enabled.
The decibels display range is from 28dB below nominal to 8dB above nominal
The bands are defined as:
Band 1 100 Hz to 400 Hz
Band 2 400 Hz to 800 Hz
Band 3 800 Hz to 1.6 kHz
Band 4 1.6 kHz to 3.2 kHz
Band 5 3.2 kHz to 15 kHz
NOTE: Only one (1) channel can be metered at a time.
You can enable metering on:
Hdst Mic
Matrix In
None (d)
OMNEO 1 (only present if connected via the AIO, not available in the KP-3016A)
OMNEO 2 (not available in the KP-3016A)
Panel Mic
To enable metering , do the following:
1.
Starting at the Audio Options|Advanced menu, select Metering .
2.
Press the SEL button .
Hdst Mic, Matrix In, None, OMNEO 1, OMNEO 2, and Panel Mic appear in the panel display.
NOTE: OMNEO 1 is only available in AIO mode. OMNEO 1 and 2 are not available on the KP-3016A.
3.
Using the AUX/MENU shaft encoder, select Hdst Mic , Matrix In , None , OMNEO 1 , OMNEO 2 , or Panel Mic .
4.
Press the SEL button .
An arrow appears next to the selected option .