RTS EKP-3016, Техническое руководство, Страница: 131 / 164

KP-3016/KP-3016A Series KP-3016/3016A Menu System 133
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
To set the screen saver mode (type) , do the following:
1.
Starting at the Service|Scrn Saver menu, select Mode .
2.
Press the SEL button .
Bitmap, Display Off and Text appear in the panel display.
3.
Using the AUX/MENU shaft encoder, select Bitmap to have a bitmap image display when the screen saver activates.
OR
Using the AUX/MENU shaft encoder,
select Display Off to put the display into sleep mode when the screen saver
activates.
OR
Using the AUX/MENU shaft encoder,
select Text to have a text message display when the screen saver activates.
4.
Press the SEL button .
If Bitmap or Text is selected, the options Bounce or Scroll appear.
5.
Using the AUX/MENU shaft encoder, select Bounce to have the bitmap or text bounce across the display.
OR
Using the AUX/MENU shaft encoder, select
Scroll to have the bitmap or text scroll across the display.
Service Menu, Set Address
Set Address is used to indicate the poll ID of the keypanel. See “KP-3016/3016A Addressing” on page 22 to determine if you
need to set the keypanel address. The poll ID is the number (or address) at which an AIO card or intercom attempts to
communicate with the keypanel. The Poll ID number is directly related to the connection port on the breakout panel.
Available options for the Poll ID are 1–8 .
To set the address , do the following:
1.
Starting at the Service|Set Address menu, select the poll ID for the keypanel.
2.
Press the SEL button .
Cancel or Save and Restart appear in the panel display.
3.
Using the AUX/MENU shaft encoder, scroll to Save and Restart .
4.
Press the SEL button .
Restarting.... appears. The keypanel resets. Once the restart is complete, the Poll ID is enabled .